Following the Nonthermal Phase Transition in Niobium Dioxide by Time-Resolved Harmonic Spectroscopy.

Photoinduced phase transitions in correlated materials promise diverse applications from ultrafast switches to optoelectronics. Resolving those transitions and possible metastable phases temporally are key enablers for these applications, but challenge existing experimental approaches. Extreme nonlinear optics can help probe phase changes, as higher-order nonlinearities have higher sensitivity and temporal resolution to band structure and lattice deformations. Here the ultrafast transition from the semiconducting to the metallic phases in polycrystalline thin-film NbO_{2} is investigated by time-resolved harmonic spectroscopy. The emission strength of all harmonic orders shows a steplike suppression when the excitation fluence exceeds a threshold (∼11-12 mJ/cm^{2}), below the fluence required for the thermal transition-a signature of the nonthermal emergence of a metallic phase within 100±20 fs. This observation is backed by full ab initio simulations as well as a 1D chain model of high-harmonic generation from both phases. Our results demonstrate femtosecond harmonic probing of phase transitions and nonthermal dynamics in solids.

Traumatology of the facial skeleton in octogenarian patients: a retrospective analysis of 96 cases.

AIM: The aim of this retrospective study was to evaluate the frequency and distribution of maxillofacial trauma patients over 80 years, with regard to type and environment of accidents as well as treatment and complications. PATIENTS AND METHODS: Data for 94 patients (96 cases; aged 80-94 years) with maxillofacial fractures were retrospectively analysed. RESULTS: Data of 30 male and 64 female patients with an average age of 85 years were analysed. In 90% of the study population, the cause of fractures was a fall, followed by traffic accidents (9%) and assault (1%). Seventy-two patients had fractures of the midface, 10 had factures of the mandible, 9 had fractures of both the midface and mandible and 5 had fractures of the neurocranium and midface. Surgical intervention was required in 57% of the patients. Post-operative complications were: four cases of diplopia, two cases of infected plates, four cases of lower eyelid ectropion and in one case a retrobulbar haematoma. CONCLUSION: Facial trauma in the elderly can often be treated conservatively unless the patient complains of functional problems. Due to co-morbidities, special attention should be paid to hypertension, anticoagulant agents and the surgical approach.

Evaluation of risk of injury to the inferior alveolar nerve with classical sagittal split osteotomy technique and proposed alternative surgical techniques using computer-assisted surgery.

Neurosensory disturbance after sagittal split osteotomy is a common complication. This study evaluated the course of the mandibular canal at three positions using computed tomography (CT), assessed the risk of injury to the inferior alveolar nerve in classical sagittal split osteotomy, based on the proximity of the mandibular canal to the external cortical bone, and proposed alternative surgical techniques using computer-assisted surgery. CT data from 102 mandibular rami were evaluated. At each position, the distance between the mandibular canal and the inner surface of the cortical bone was measured; if less than 1mm or if the canal contacted the external cortical bone it was registered as a possible neurosensory compromising proximity. The course of each mandibular canal was allocated to a neurosensory risk or a non-neurosensory risk group. The mandibular canal was in contact with, or within 1mm of, the lingual cortex in most positions along its course. Neurosensory compromising proximity of the mandibular canal was observed in about 60% of sagittal split ramus osteotomy sites examined. For this group, modified classic osteotomy or complete individualized osteotomy is proposed, depending on the position at which the mandibular canal was at risk; they may be accomplished with computer-assisted navigation.

Missing facial parts computed by a morphable model and transferred directly to a polyamide laser-sintered prosthesis: an innovation study.

Mirroring of missing facial parts and rapid prototyping of templates have become widely used in the manufacture of prostheses. However, mirroring is not applicable for central facial defects, and the manufacture of a template still requires labour-intensive transformation into the final facial prosthesis. We have explored innovative techniques to meet these remaining challenges. We used a morphable model of a face for the reconstruction of missing facial parts that did not have mirror images, and skin-coloured polyamide laser sintering for direct manufacture of the prosthesis. From the knowledge gleaned from a data set of 200 coloured, three-dimensional scans, we generated a missing nose that was statistically compatible with the remaining parts of the patient's face. The planned prosthesis was manufactured directly from biocompatible skin-coloured polyamide powder by selective laser sintering, and the prosthesis planning system produced a normal-looking reconstruction. The polyamide will need adjustable colouring, and we must be able to combine it with a self-curing resin to fulfil the requirements of realistic permanent use.

Facial acquisition by dynamic optical tracked laser imaging: a new approach.

Three-dimensional capture of the surface of soft tissue is a desirable support for documentation and therapy planning in plastic and reconstructive surgery concerning the complex anatomy of the face, particularly cleft lip and palate (CLP). Different scanning systems are used for capturing facial surfaces. These systems are mostly based on a static linear measuring arrangement. Established systems work on the basis of coded white light or linear laser triangulation and digital stereophotogrammetric approaches. Shadowing effects occur with these devices. These effects may be avoided by a radical new approach first used in automotive industries that employs a mobile, flexible handheld laser scanner with simultaneous registration by optical tracking. The aim of this study was to assess the suitability of this scanner for surgical procedures on the human face in operating theatre. Five babies aged about 3 months with cleft deformities (one CLP, one bilateral CLP, three isolated cleft lips) were captured directly: twice preoperatively, twice postoperatively and twice after 7 days. An industrial standard specimen and two plaster cast masks of CLP babies were taken and subsequently measured to assess reliability and validity of the device. Masks were measured to reflect the complex surface of the cleft deformity. Data evaluation was done with respect to completeness of the data sets, as well as reliability and validity of the system. Missing data caused by shadowing could be avoided in all images. Even complex areas with undercuts could be reproduced completely and precisely with an accuracy in the sub-millimetre range.

3D surface measurement for medical application--technical comparison of two established industrial surface scanning systems.

In 3D mapping of flexible surfaces (e.g. human faces) measurement errors due to movement or positioning occur. Aggravated by equipment- or researcher-caused mistakes considerable deviations can result. Therefore first the appliances' precision handling and reliability in clinical environment must be established. Aim of this study was to investigate accuracy and precision of two contact-free 3D measurement systems (white light vs. laser). Standard specimens of known diameter for sphere deviation, touch deviation and plane deviation were tested. Both systems are appropriate for medical application acquiring solid data (

Persistent environmental pollutants in eggs of aplomado falcons from Northern Chihuahua, Mexico, and south Texas, USA.

The northern aplomado falcon (Falco femoralis septentrionalis) disappeared from south Texas in the 1940s. Due to great success in the release of captive-reared aplomado falcons in south Texas, there are currently more than 40 established nesting pairs in the region. Addled eggs from aplomado falcons nesting in northern Chihuahua and south Texas were analyzed to determine organochlorine (OC) and inorganic element contaminant burdens and their potential association with egg failures and effects on reproduction. Among the OCs, DDE [1,1-dichloro-2,2-bis(p-chlorophenyl)ethylene] was present at the highest concentrations (range 262-21487 ng/g wet weight) followed by polychlorinated biphenyls (PCBs, range 88-3274 ng/g ww). DDE was greater (P=0.03) in eggs from El Sueco (Chihuahua, Mexico) than in those from Matagorda Island (Texas, USA). DDE concentrations in eggs of aplomado falcons from El Sueco were elevated; however, reproductive success in the two Chihuahuan populations did not seem to be affected by DDE. DDE and metals in potential avian prey of the aplomado falcon from Matagorda Island were very low and below levels in the diet at which some negative effects might be expected. Except for mercury (Hg), metal concentrations in eggs were fairly low and were not different among locations in Chihuahua and south Texas. Hg was somewhat elevated and was greater (P<0.001) in Texas than in the Chihuahua locations. Periodic monitoring of Hg concentrations in addled eggs of aplomado falcons in south Texas is recommended to continue evaluating potential negative effects on their recovery.